User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Honeywell 8476:Digital Temperature Indicator
DATE:                  07-Oct-97
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       14
NUMBER OF LINES:       123
CONFIGURATION:         Fluke 5700A
STANDARD:              Omega TRC III
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R                    P     U                      F        W
  1.002  ASK+                                          X
  1.003  STD          Omega TRC III
  1.004  HEAD         INITIAL CONDITIONS
  1.005  DISP         Insert the reference thermocouple into the center
  1.005  DISP         well of the Ice Point Cell.
  1.006  DISP         Connect the copper end (white connector) to the
  1.006  DISP         5700 OUTPUT HI/LO. Red wire is HI, green wire is LO.
  1.007  DISP         Connect the thermocouple side (blue connector) to
  1.007  DISP         channel 1 on the UUT.
  1.008  DISP         Set the channel selector switch to 1.
  1.009  HEAD         {* ThermoCouple Tests *}
  1.010  HEAD         {"T" Type T/C}
  1.011  HEAD         {Channel 1}
  1.012  JMP          2.001
  1.013  EVAL
  2.001  5700         -2.581mV                                          S  2W
  2.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  2.003  ACC          -100°F         0.10U
  2.004  MEME
  2.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  3.001  5700         -0.674mV                                          S  2W
  3.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  3.003  ACC          0°F            0.10U
  3.004  MEME
  3.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  4.001  5700         0.000mV                                           S  2W
  4.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  4.003  ACC          32°F           0.1U
  4.004  MEME
  4.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  5.001  5700         1.518mV                                           S  2W
  5.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  5.003  ACC          100°F          0.1U
  5.004  MEME
  5.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  6.001  5700         3.967mV                                           S  2W
  6.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  6.003  ACC          200°F          0.1U
  6.004  MEME
  6.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  7.001  5700         6.647mV                                           S  2W
  7.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  7.003  ACC          300°F          0.1U
  7.004  MEME
  7.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  8.001  5700         9.523mV                                           S  2W
  8.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  8.003  ACC          400°F          0.1U
  8.004  MEME
  8.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
  9.001  5700         10.272mV                                          S  2W
  9.002  MEMI         Use the keyboard to enter the UUT reading in °F.
  9.003  ACC          425°F          0.1U
  9.004  MEME
  9.005  MEMC         °F             3.5U
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
 10.001  DISP         Move the reference probe thermocouple leads
 10.001  DISP         to channel 2.  Set the channel selector switch to 2.
 10.002  5700         1.518mV                                           S  2W
 10.003  MEMI         Use the keyboard to enter the UUT reading in °F.
 10.004  ACC          100°F          0.1U
 10.005  MEME
 10.006  MEMC         °F             3.5U          ch2
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
 11.001  DISP         Move the reference probe thermocouple leads
 11.001  DISP         to channel 3.  Set the channel selector switch to 3.
 11.002  5700         1.518mV                                           S  2W
 11.003  MEMI         Use the keyboard to enter the UUT reading in °F.
 11.004  ACC          100°F          0.1U
 11.005  MEME
 11.006  MEMC         °F             3.5U          ch3
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
 12.001  DISP         Move the reference probe thermocouple leads
 12.001  DISP         to channel 4.  Set the channel selector switch to 4.
 12.002  5700         1.518mV                                           S  2W
 12.003  MEMI         Use the keyboard to enter the UUT reading in °F.
 12.004  ACC          100°F          0.1U
 12.005  MEME
 12.006  MEMC         °F             3.5U          ch4
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
 13.001  DISP         Move the reference probe thermocouple leads
 13.001  DISP         to channel 5.  Set the channel selector switch to 5.
 13.002  5700         1.518mV                                           S  2W
 13.003  MEMI         Use the keyboard to enter the UUT reading in °F.
 13.004  ACC          100°F          0.1U
 13.005  MEME
 13.006  MEMC         °F             3.5U          ch5
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).
 14.001  DISP         Move the reference probe thermocouple leads
 14.001  DISP         to channel 6.  Set the channel selector switch to 6.
 14.002  5700         1.518mV                                           S  2W
 14.003  MEMI         Use the keyboard to enter the UUT reading in °F.
 14.004  ACC          100°F          0.1U
 14.005  MEME
 14.006  MEMC         °F             3.5U          ch6
#!          Test Tol 3.5, Sys Tol 0.1, TUR 35.0000 (>= 4.00).

#! T.U.R.s less than 4.00:                  0
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.